[Fpga-synth] New Guy Here :)

[malik martin]

hey nathan,

   I just had a spare computer that didnt get thrown away and ended up using
the cables in there for it.along with a headphone plug from radioshack, 3 6"
wires for L/R/G and some alligator clips :P Most of the waveforms look the
same or similar on the audio projects though. even the ones from xilinx.

Malik

On Fri, Jul 25, 2008 at 1:54 AM, Nathan Wooster <woostern at yahoo.com> wrote:

> I just got my starter kit too.  Thanks Eric, Scott, and everyone else for
> the great FAQ's and start up hints.
>
> The website looks a little stale, but also check out the wiki:
>
>  http://www.fpga.synth.net/pmwiki/pmwiki.php
>
> To get audio out, I plan on making a little daughter board with some jacks
> and inline ac coupling capacitors.  The DAC output header (J5) has fairly
> standard pin spacings so it shouldn't be to hard to find some connector to
> fit it.
>
> Nathan
>
> --- On Sat, 7/12/08, malik martin <laserbeak43 at gmail.com> wrote:
>
> > From: malik martin <laserbeak43 at gmail.com>
> > Subject: [Fpga-synth] New Guy Here :)
> > To: fpga-synth at rubidium.dyndns.org
> > Date: Saturday, July 12, 2008, 8:22 AM
> > Hi there,
> >    Just got a digilent Spartan 3E starter kit and i've
> > been looking at the
> > fpga.synth website. I'm really hyped up about making a
> > synth with an FPGA!
> > thanks to evenryone who has contributed to that site! XD
> >
> >    One thing i did notice though, the site hasnt been
> > updated since 2006
> > IIRC, i just hope i haven't missed the FPGA boat. I
> > hope the community is
> > still active(has it ever been?). Glad to be here finaly
> > thought.
> >
> >   Quick question, how does one get audio out of the
> > digilent board?
> >  Seems there are only pins and no jack. should i use
> > alligator clips? i've
> > made some for such an occasion,
> > http://www.freewebs.com/laserbeak43/pics/leads.jpg
> >
> > would those work?
> >
> > is there anything else i should know? i'm thinking of
> > trying to figure out
> > how to get midi to work as well.
> > _______________________________________________
> > Fpga-synth mailing list
> > Fpga-synth at rubidium.dyndns.org
> > http://rubidium.dyndns.org/cgi-bin/mailman/listinfo/fpga-synth
>
>
>
>
>
> _______________________________________________
> Fpga-synth mailing list
> Fpga-synth at rubidium.dyndns.org
> http://rubidium.dyndns.org/cgi-bin/mailman/listinfo/fpga-synth
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rubidium.dyndns.org/pipermail/fpga-synth/attachments/20080806/cbe2f375/attachment.htm>